Part # M101 | M102 
Rear Sump Chrysler Pans

This rear sump fits cars with front steer or with engine set back. The sump measures 7 1/2" deep, 12" long, 12" wide. It has 3 gates, 2 diverters, removable tray, crank scraper and oil level plug. Painted Black Finish. Optional windage tray, 8 quart capacity.

Part # M102 SC  Mopar Metric Chassis Pan

This newly designed Kevko pan can be used for the racer switching over to the Mopar 360 engine, under the IMCA stock car rules. This pan has good gating, a removable tray, is 7 1/2" deep, and holds 6 quarts of oil. IMCA rules require a 1" inspection plug in the pan which would cost an additional $12.00.

Part # M201 | M202 
Chrysler Sportsman Pans

This pan is kicked out on both sides. The sump measures 12" long, 14" wide, 7 1/2" deep. It has 6 gates, a diverter, full windage tray, crank scraper, oil temp fitting and an oil level plug. 8 quart capacity. Plated Yellow.

Part # M201PP/M202PP Chrysler Sportsman Pouch Pan

This pan has the same gating and capacity as the regular sportmans pan, but with an added power pouch on the right side.

Part # M301 | M302 
Chrysler Stock Location Pans

This pan fits most stock pan locations and works in the K-member cars. It has a 2 straight gate assembly, crank scaper, and baffles. It measures 8" deep with the front expanded for more capacity, making it 5 quarts in pan.

Part # M301 A | M302 A  Fabricated Aluminum Stock Location

Kevko has developed this hard to find fabricated Mopar pan for those who want to get the most out of their Mopar engines. The light weight design saves some 5 lbs over a steel pan, along with dispersing the heat for cooler oil temperatures.The 8" deep pan has a series of baffles and scrapers for oil control, and the capacity is 5 quarts in the pan.

Part # M303 | M304 
Mopar Truck Pan

This pan is 8" deep, has an 8" long sump, and is 4 1/2" deep in the front, and includes a universal dipstick. The capacity is 5 quarts in pan.

Part # M305 | M306  Mopar Stock Appearing Pan

This stock appearing pan was designed for the guys wanting the stock look, or needing that as track rules apply. The pan has a 2 gate assembly, crank scraper and multiple baffles. It has a 7 1/2" deep sump, holding the stock capacity of 4 quarts in the pan.

Part # M101-1 Stud Kit Mopar 340/360 Stud and Bolts

This is the pickup tube mounting kit for the Mopar rear sump pans. There are nuts and washers included.

$17.00

Part # M401 | M402 
Chrysler Dry Sump Pans

Please specify number of exits when placing your order.

Part # M403 | M404 
Mopar Dry Sump

This is 5 1/4" deep, 3 exit pan for the asphalt big bar, soft spring setup.

Part # M405 | M406 
Aluminum Sportsman Pouch Pan

This pan is the same as the M201/202
but in a lighter aluminum version and has the advantage of the power pouch below the right pan rail for increased power and lower oil temperatures.

Part # M500 | M500W Mopar 361-440 Street Strip Pan

This big block stock location pan will fit most 1966 and up production chassis, utilizing our diamond gates for great street stip and road race oil control. The pan is 5" deep and has a 5 quart capacity, with an optional windage screen available for increased horsepower. Call for details on other depths and designs available for the 440 mopar engine.